Selleys Malaysia
speed_seal
Available Sizes:
  • 300g (White)
  • 300g (Clear)
  • 75g (Clear)
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?

Wet Area Speed Seal Silicone
Super fast cure and stiff consistency provide a waterproof seal to allow shower use 2 HOURS after application. Cured sealant is formulated to resist growth of unsightly mould and mildew.

  • Showers
  • Baths & Spas
  • Sinks
  • Plumbing Fixtures
  • Ceramic, Glazed & Porcelain Fixtures
  • Metal
  • Copper & Brass Fittings
    • Powder Coated Aluminium / Aluminium
    • Plastic Laminates
    • Rubber
    • Glass
    • Stainless Steel
    • Concrete & Grouts

     

    • Waterproof
    • Mould Repellent
    • Resists Lifting
    • Neutral Cure
    • 100% Siliconee
    • 25 Year Guarantee*

     

    • Clean & dry surface using Mineral Turpentine.
    • Cut tip off cartridge and cut nozzle at a 45˚ angle. Fit nozzle to cartridge. Place cartridge into caulking gun.
    • Hold caulking gun at 45˚ angle and gun sealant ahead of nozzle ensuring product is pushed into joint.

     

    • For a smooth finish, tool with spatula within 5 minutes of application. For best finish dip spatula in detergent.
    • Excess sealant must be cleaned up before product skins. Wipe away excess with a cloth dampened in Mineral Turpentine.
    • Sealant will have a firm skin and will be waterproof and shower ready 2 hours after application in showers. The semi-cured sealant must not be touched until fully cured (48 hours).
    • For a large job, break up into sections tooling off after each, before the sealant skins over.
    • For a better finish complete painting prior to use of sealant as it cannot be painted over.
    • For a cleaner appearance mask both sides of joint prior to sealing. Remove tape before silicone skins.
    • Not recommended for use in aquariums or where there is contact with food, eating utensils or drinking water.
    • Store in a dry place below 30˚C. After opening, use within 6 months.

      • Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
      • Avoid contact with skin, if contact occurs, wipe off immediately and wash with detegent. It may irritate sensitive skin.
      • Avoid breathing in vapours.
      • Ensure you use a well ventilated area as product releases methyl ethyl ketoxime while curing.
      • For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
      • Keep away from children.

      enquirydownload_msds