Selleys Malaysia
strong adjustable supa glue
Available Sizes:
  • 3g
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?

Strong & Adjustable Supa Glue
Selleys Strong & Adjustable Supa Glue Gel is great for all types of household repairs. The thick gel consistency means repairs with no mess. It allows extra time (20-60 secs) to align or reposition surfaces, for perfect results. It requires no mixing, gives a strong bond in seconds and dries clear. And of course you know that if it’s Selleys it works!

  • Bonds a variety of porous and non-porous surfaces
  • Metals
  • Wood
  • China
  • Rubber
  • Leather (test first as some leather may become hardened or discoloured)
  • Some plastics

 

  • Bonds a variety of surfaces
  • Extremely fast setting
  • Dries Clear for clean, neat results
  • Water resistant
  • No clamping necessary
  • No mixing required
  • Maximum strength achieved in 12 hours
  • Only takes 45 seconds to achieve initial bond
  • Self piercing, clog free cap
  • Forms a rigid bond
  • Non-drip gel consistency is ideal for vertical jobs
  • Can be used for gap filling due to gel consistency

 

  • Ensure surfaces to be bonded are clean, dry, free of dust and close fitting.
  • Remove nozzle and pierce tube seal with reverse end of cap and replace nozzle.
  • Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure. Allow 30 minutes for sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
  • Wipe tip of tube, replace cap and store upright in dry cool place.

 

  • Supa Glue can create a white residue on the surface of a material if the area is not well ventilated.  Clean the affected area with acetone, to remove residue.
  • Use Selleys Strong & Adjustable Supa Glue on vertical surfaces.
  • Excellent when used with other adhesives, as the temporary tack.
  • For best results, ensure surfaces to be bonded are clean, free of dust, dry and close fitting.
  • After use, wipe excess product from the nozzle with a tissue dipped in nail polish remover.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
  • In the event that fingers get stuck together - don't panic! Slowly twist fingers in opposite direction in hot soapy water.
  • Selleys Strong & Adjustable Supa Glue is good for use on wood & porous surfaces (e.g terracotta pots)  as it doesn't soak into the surface like a liquid would.
  • Acetone (most nail polish remover) or Olive oil can also be used to remove Supa Glue from skin.
  • Since Supa Glue cures with moisture, set times may be extended on very dry surfaces or under dry conditions.
  • Super glues cure more slowly when large amounts are used.  For faster cure use sparingly.
  • While supa glue is not recommended for use on some plastics, if your kids have broken their favourite toy, try this method:  Line up the two pieces, glue it, leave it for 24 hours to dry, then drop more glue on the break area like a 'collar'/protective layer.
  • To remove excess from materials, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of absorbent material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates.  Gently rub the surface with the material to remove the residues.  TEST THE SURFACE IN AN INCONSPICUOUS SPOT to ensure it is unaffected by acetone before attempting removal using this method.
  • Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.

  • Avoid contact with the skin and eyes.
  • Avoid breathing vapour.
  • Supa Glue is non-hazardous once cured. Where Supa Glue residues are on the skin, it is recommended that the skin be soaked in warm to hot water to allow easy removal. It is not advisable to try to remove the cured adhesive by pulling and scraping the skin as this will only serve to damage the skin. Alternatively rub in hand cream or vegetable oil to accelerate the natural process of the skin sloughing off to remove the residue.  Where immediate adhesive removal is considered necessary apply a solvent such as acetone (nail polish remover) then wash off with soapy water. Apply hand cream to replace naturals oils in skin.
  • Do not use near eyes or open wounds.
  • In case of contact with eyes, flush with water for at least 15 minutes and seek medical attention.
  • Non toxic when set

enquirydownload_msds