Selleys Malaysia
No More Stains B110
Available Sizes:
  • 1 Litre
  • 5 Litre
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?


No More Cracks B110
Great preparation for preventing hairline cracks
Selleys No More Cracks B110 is a high-build, elastomeric membrane coating, designed to fill and bridge cracks in cement render and to provide the long-term protection of masonry substrates.

  • Repaired areas where water has entered walls
  • Over hairline cracks both interior & exterior surfaces
  • For filling & repairing cracks up to 2.5mm


  • Bridges cracks up to 2.5 mm
  • Extremely weather resistant
  • Achieve smooth or textured finish
  • Algae resistant
  • Coverage: 1 - 2 square metres per litre
  • Clean up: Water
  • Touch Dry: 2 hours
  • Re-coat: 24 hours


Previously Painted Surfaces: Ensure surface is clean and free from dust, dirt, grease and oil. Remove any loose, peeling, flaking or chalky paint by sanding or scraping. Apply one coat Selleys Interior Wall Sealer B200 or one coat of Selleys Exterior Wall Sealer B205.
Cement Render and Plaster: Clean surface to remove all loose and flaking materials and contaminants. Apply one coat of Selleys Interior Wall Sealer B200 or one coat of Selleys Exterior Wall Sealer B205.


Application Tool: Brush or roller.

Before applying - stir product with a broad, flat paddle. Treat crack with Selleys No More Fungus B115 to kill mould growth and contamination in the crack, rinse with fresh water. Allow to dry for 1 hour. Apply one coat of Selleys Interior Wall Sealer B200 or Selleys Exterior Wall Sealer B205, brushing in along and into the line of the crack. Allow to dry for 2 hours.

Fill cracks first by Brushing Selleys No More Cracks B110 into the cracks. Allow to dry for 24 hours. For large cracks two applications of Selleys No More Cracks B110 will be required.

Apply a full coat of Selleys No More Cracks B110 across the effected area using a medium nap roller. Allow to dry for 24 hours then apply the second full coat of Selleys No More Cracks B110. Allow to dry. Protect from rain for the first 24 hours.

Thinning: Do not thin.


Keep out of reach of children. Provide adequate ventilation - keep windows and doors open during use and drying. Do not swallowed, do not induce vomiting - drink plenty of water and seek medical attention. Avoid skin and eye contact - if skin contact occurs remove contaminated clothing and wash thoroughly with soap and water. If in eyes, hold eyelids apart and flush eye continuously with water for 15 minutes. SEEK MEDICAL ASSITANCE / ADVICE.


  1. Wash the surface thoroughly to remove any mould, grease or dirt and sandpaper loose paint flakes and other material off the surface prior to painting, as the new paint will not stick to a poorly prepared surface.


  2. Once the surface is clean, dry and free from loose material apply a coat of Base Coat and allow to dry. Some surfaces may require a second coat to cover stubborn stains like mould. Ensure Base Coat is properly dry before applying the finishing coat.


  3. Once the Base Coat has fully dried, you are ready to apply the top coats. We recommend two coats of your chosen topcoat for a durable, long lasting finish.

By following these key steps, you will achieve a great result for whatever surface you are painting. Proper preparation using Base Coat is the key to achieving longer lasting top coats.