Selleys Malaysia
advance wall sealer
Available Sizes:
  • 5 Litre
  • 18 Litre
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?

Advance Wall Sealer
Prevents Efflorescence
Advance Wall Sealer is a low VOC, highly alkaline resistant, 100% acrylic water-based primer/ sealer. Apply to new ‘green’ cement render surfaces after 7 days. It prevents a build-up of white salt deposits (efflorescence) on the surface of the substrate. This environmentally friendly, deep penetrating sealer bonds loose surfaces.

Where to Use: Interior & exterior, new render surfaces


    • Water Based
    • Low VOC
    • Seal & Primes Masonry Surfaces
    • Superior Water & Alkali Resistance
    • Apply to New Render After 7 Days Cure Time
    • For Interior & Exterior


      Ensure new cement render surfaces have aged for at least 7 days. Ensure clean and free from dust, dirt, grease and oil. Clean surface to remove all loose and flaking materials and contaminants.


      Application: Brush or roller
      Coverage: Up to 5.5 square metres per litre
      Clean up: Water
      Touch Dry: 30 minutes
      Re-coat: 4 hours
      Thinning: Not usually required. In hot conditions or on porous surfaces use up to 50ml of water per litre.

      Before applying – stir product with a broad, flat paddle. Apply one even coat of Selleys Advance Wall Sealer. Very porous surfaces may require a second coat of Selleys Advance Wall Sealer.


      • Keep container tightly closed. Keep out of reach of children
      • Store material in a cool, well-ventilated and dry place, away from direct sunlight.
      • Ensure adequate ventilation during application.
      • Keep away from excessive heat, sparks or flame.
      • Avoid contact with skin or eyes. Any skin or eye contamination should be washed off with plenty of water or seek medical attention.