Selleys Malaysia
no more cracks
Available Sizes:
  • 1 Litre
  • 4.5 Litre
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?


No More Cracks
Prevents Hairline Cracks
Selleys No More Cracks is a high-build elastomeric membrane coating, designed to bridge cracks in cement render and to provide the long-term protection of masonry substrates.

• Guaranteed long term exterior durability

• Provides maximum flexibility for expansion & contraction
• Stops water ingress into the substrate
• Provides a barrier against chloride attack
• Protects against acid rain
• Highly resistant to fungal and algae growth


  • Repaired areas where water has entered walls
  • Over hairline cracks both interior & exterior surfaces
  • For filling & repairing cracks up to 2.5mm


  • Water Based
  • Bridges Cracks Up to 2.5mm
  • Extremely Weather Resistant
  • Smooth or Textured Finish
  • Algae Resistance
  • For Interior & Exterior


Previously Painted Surfaces - Ensure surface is clean and free from dust, dirt, grease and oil. Remove any loose, peeling, flaking or chalky paint by sanding or scraping. Apply one coat Selleys Wall Sealer.

Cement Render and Plaster - Clean surface to remove all loose and flaking materials and contaminants. Apply one coat Selleys Wall Sealer.


Application: Brush or roller
Coverage: 1-2 square metres per litre
Clean up: Water
Touch Dry: 2 hours (Re-coat 24 hours)
Thinning: Do not thin

Before applying – stir product with a broad, flat paddle. Treat crack with Selleys No More Fungus to kill mould growth and contamination in the crack, rinse with fresh water. Allow to dry for 1 hour. Apply one coat of Selleys Wall Sealer, brushing in along and into the line of the crack. Allow to dry for 2 hours.

Fill cracks first by Brushing Selleys No More Cracks into the cracks. Allow to dry for 24 hours. For large cracks two applications of Selleys No More Cracks will be required.

Apply a full coat of Selleys No More Cracks across the effected area using a medium nap roller. Allow to dry for 24 hours then apply the second full coat of Selleys No More Cracks. Allow to dry. Protect from rain for the first 24 hours.


  • Keep container tightly closed. Keep out of reach of children
  • Store material in a cool, well-ventilated and dry place, away from direct sunlight.
  • Ensure adequate ventilation during application.
  • Keep away from excessive heat, sparks or flame.
  • Avoid contact with skin or eyes. Any skin or eye contamination should be washed off with plenty of water or seek medical attention.