Selleys Malaysia
supa glue shock proof
Available Sizes:
  • 3ml
Top 5 Problems:
  1. Broken something made of plastic and don’t know what will fit it?
  2. Broken a glass vase?
  3. Mould growing on your bathroom silicone?
  4. Laminate furniture starting to peel?
  5. How to stop a door hinge from squeaking?

Supa Glue Shock Proof
Selleys Shock Proof is a breakthrough in Supa Glue technology. It has up to 4 times the bond strength on metals than standard Super Glues. It is impact resistant, heat resistant up to 150˚C and is more flexible than standard super glues. Shock Proof has been formulated to give you more working time than standard Super Glues and sets in around 2-3 minutes. And of course you know that if it's Selleys it works!

  • Metals
  • Wood
  • Rubber
  • China
  • Leather
  • Paper
  • Most Plastics


  • Shockproof, 4 times more impact resistant
  • Heat resistant
  • Non-clog
  • Superior bond on metals


  • Ensure surfaces to be bonded are clean, dry and free of dust.
  • Pierce seal by attaching nozzle and cap.
  • Apply small amount of glue to one surface and bring surface together. Bond strength achieved after 12 hours. Full cure after 48 hours.
  • Wipe tip of tube, replace cap and store upright in dry cool place.


  • Not recommended for polyethylene, polypropylene plastics or glass.
  • Items that contain hot liquids e.g. mugs.
  • May Cause leather to discolour or harden. If in doubt, test on small areas first.
  • Withstand 150°C for up to 1.5 hours after 48 hours curing.
  • Not suitable for continuous exposure to elevated temperature.


  • Keep out of reach of children.
  • Avoid contact with skin, eyes and avoid breathing vapour.
  • Should fingers stick together, apply a solvent such as acetone (nail polish remover) and wash off with water.
  • DO NOT use solvents near eyes or open wounds.
  • NOTE: This product is not hazardous once cured.